Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1.3.6.1.4.1.2011.5.25.219.2.12.3 hwPortNoSupportOETrap
Description
L2IFPPI/4/CSS_NOSUPPORT_OEPORT:OID [OID] The 1000base-T optical/electrical module or optical module cannot be installed on the port when the port is used as a stack port.(EntityPhysicalIndex=[INTEGER], EntityIfIndex=[INTEGER], EntPhysicalName=[OCTET], hwEntityTrapFaultID=[INTEGER]).
A port has been configured as a CSS port, and the SFP copper module cannot be used on this port.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1 .4.1.2011.5.25.219.2.12.3 | Warning | environmentalAlarm(6) |
Parameters
| Name | Meaning |
|---|---|
| EntityPhysicalIndex | Indicates the index of the physical port. |
| EntityIfIndex | Indicates the logical interface index. |
| EntPhysicalName | Indicates the physical port name. The value depends on the port type. Different cards support different port types. |
| hwEntityTrapFaultID | Indicates the error code. |
Possible Causes
A port is configured as a CSS port, and the SFP copper module installed on the port cannot be used for CSS connection.
Procedure
- To use this port as a CSS port, install an SFP copper module that supports CSS connection.
- If you do not want to use this port as a CSS port, delete the CSS port. The SFP copper module does not need to be replaced when the port is used as a common service port.
- If the alarm persists, contact technical support personnel.
Previous
