No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
PIM_1. hwPimStarGExceedClear

PIM_1. hwPimStarGExceedClear


PIM/3/hwPimStarGExceedClear:OID [oid] PIM (*, G) entries can be created because the number of PIM (*, G) entries of all instances fell below the limit. (hwPimNotificationAddressType=[integer])

The number of global PIM (*, G) entries created fell below the maximum number of global PIM (*, G) entries allowed and new PIM (*, G) entries could be created again.


Alarm ID Alarm Severity Alarm Type




Name Meaning


Indicates the MIB object ID of the alarm.


Group address type:
  • 1: IPv4 address

  • 2: IPv6 address

Impact on the System

Services will not be affected.

Possible Causes

The number of global PIM (*, G) entries created fell below the maximum number of global PIM (*, G) entries allowed.


  1. This message is informational only, and no action is required.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 189985

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next