No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2V_1. hwVplsVcNumberThresholdClear

L2V_1. hwVplsVcNumberThresholdClear


L2V/3/VPLSVC_THRESHOLD_CLEAR_T: OID [OID] The number of VPLS VCs falls below the lower threshold.

The proportion of VPLS VC created to the maximum VPLS VCs allowed fell below the lower alarm threshold.


Alarm ID Alarm Severity Alarm Type




Name Meaning


Indicates the MIB object ID of the alarm.

Impact on the System

Services will not be affected.

Possible Causes

The proportion of VPLS VCs created to the maximum VPLS VCs allowed fell below the lower alarm threshold.


  1. This message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 191224

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next