No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ACLE_1. hwAclResTotalCountExceedClearTrap

ACLE_1. hwAclResTotalCountExceedClearTrap


ACLE/4/ACL_RULERESFULLRESUME_TRAP:OID [OID] The rule resource usage is restored to be lower than [INTEGER]%.(Slot=[OCTET], Stage=[OCTET])

The ACL resource usage decreased from 100% and kept below 100% for a period.


Alarm ID Alarm Severity Alarm Type Warning qualityOfServiceAlarm(3)


Name Meaning
OID Indicates the ID of the MIB object.
INTEGER Indicates the ACL resource usage. The value is fixed as 100.
Slot Indicates the slot ID of the card where the alarm is generated.
Stage Indicates the ACL processing stage when the alarm is generated.

Impact on the System


Possible Causes

The ACL resource usage decreased from 100% and kept below 100% for a period.


  1. This alarm is informational only, and no action is required.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 184253

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next