No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFPDT_1. hwSubIfNumExceededSpecAlarmResume

IFPDT_1. hwSubIfNumExceededSpecAlarmResume


IFPDT/4/SUBIFNUMNORMAL: OID [OID] The number of subinterfaces on the switch falls below the limit. (SubIfSpec=[INTEGER])

The number of sub-interfaces on the switch was less than or equal to the maximum value.


Alarm ID Alarm Severity Alarm Type Warning qualityOfServiceAlarm(3)


Name Meaning


Indicates the trap OID.


Indicates the maximum number of sub-interfaces.

Impact on the System


Possible Causes

The number of sub-interfaces on the switch was less than or equal to the maximum value.


  1. This alarm is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 189972

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next