No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPFV3_1. hwOspfv3IfRxBadPacket

OSPFV3_1. hwOspfv3IfRxBadPacket


OSPFV3/3/IFRXBADPKT:OID [oid] Error packet was received on the non-virtual interface. (IfIndex=[integer], InstanceId=[integer], RouterId=[gauge], IfState=[integer], PacketSrcAdd=[octet], PacketType=[integer])

An OSPFv3 packet that cannot be parsed was received from a non-virtual-link interface. A possible cause is that the Huawei device was attacked or the interconnection between the Huawei device and non-Huawei device failed.


Alarm ID Alarm Severity Alarm Type Minor processingErrorAlarm(4)


Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the index of the interface.


Indicates the ID of the OSPFv3 instance. The value is a decimal integer.


Indicates the Router ID of the local switch. The value is a decimal integer.


Indicates the status of the non-virtual link interface.
  • 1: Down
  • 2: Attempt
  • 3: Init
  • 4: 2-Way
  • 5: Exstart
  • 6: Exchange
  • 7: Loading
  • 8: Full


Indicates the address of the source node that sends the packet.


Indicates the type of the packet.
  • 1: Hello
  • 2: DD(Data base Description) packet
  • 3: LS Request
  • 4: LS Update
  • 5: LS Acknowledgement
  • 6: NULL packet

Impact on the System

This trap is generated when a common interface receives an error packet that cannot be processed and then discards this packet. This may cause the neighbor to go Down.

Possible Causes

An error packet was generated by the non-virtual-link interface on the remote end.


  1. Collect alarm information and configuration information, and then contact technical support personnel.
  2. End.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 190013

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next