No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP_1.3.6.1.6.3.1.1.5.1 coldStart

SNMP_1.3.6.1.6.3.1.1.5.1 coldStart

Description

SNMP/4/COLDSTART:OID [oid] coldStart.

The device was cold started.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.6.3.1.1.5.1 Warning equipmentAlarm(5)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

Impact on the System

The alarm, generated because of the device cold start, brings no adverse impact on the system.

Possible Causes

The device was cold started.

Procedure

  • This trap message is informational only, and no action is required.

Related Information

None.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 192764

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next