No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPLPM_1.3.6.1.4.1.2011.5.25.328.2.4 hwIplpmLinkForwardLossRatioRecovery

IPLPM_1.3.6.1.4.1.2011.5.25.328.2.4 hwIplpmLinkForwardLossRatioRecovery

Description

IPLPM/2/IPLPM_TRAP_LINK_LOSSRATIO_RECOVERY: OID [OID] The link packet loss ratio does not reach the lower threshold in five consecutive intervals. (IfIndex=[ULONG], IfIndex=[ULONG], PeriodHigh=[ULONG], PeriodLow=[ULONG], ForwardLossPkts=[COUNTER64], ForwardLossRatio=[LONG], PeriodNo=[COUNTER64])

In direct link packet loss measurement, the packet loss ratios in five consecutive intervals were equivalent to or below 1%.

Attribute

Alarm ID Alarm Severity Alarm Type

1.3.6.1.4.1.2011.5.25.328.2.4

Major

qualityOfServiceAlarm(3)

Parameters

Name Meaning

[OID]

Indicates the MIB object ID of the alarm.

IfIndex

Indicates the interface index.

IfIndex

Indicates the interface index.

PeriodHigh

Indicates the high bits in measurement interval number.

PeriodLow

Indicates the low bits in measurement interval number.

ForwardLossPkts

Indicates the number of lost packets in forward flows.

ForwardLossRatio

Indicates the packet loss ratio in forward flows.

PeriodNo

Indicates the measurement interval number.

Impact on the System

Services are not affected.

Possible Causes

In direct link packet loss measurement, when the packet loss ratios in five consecutive intervals are equivalent to or below the clear alarm threshold, this clear alarm is reported. The forwarding performance of the link is normal.

Procedure

  • This alarm is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 182286

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next