No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
POE_1. hwPoePowerOverUtilizationThresholdResume

POE_1. hwPoePowerOverUtilizationThresholdResume


POE/4/PWRUTITHRESHRESUME: OID [oid] PSE power consumption is below the upper limit.(ChassisID=[INTEGER], ConsumingPower=[INTEGER], PowerThreshold=[INTEGER])

The total PoE power consumption is smaller than the alarm threshold.


Alarm ID Alarm Severity Alarm Type Warning communicationsAlarm(2)


Name Meaning
oid Indicates the MIB object ID of the alarm.
ChassisID Indicates the ID of the chassis where the alarm is generated.
ConsumingPower Indicates the current power consumption.
PowerThreshold Indicates the power threshold.

Impact on the System

Services are not affected.

Possible Causes

The total power consumption of all the PDs is smaller than the alarm threshold.


  1. This alarm indicates that a fault is rectified, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 182966

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next