No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LDP_1.3.6.1.2.1.10.166.4.0.2 mplsLdpPathVectorLimitMismatch

LDP_1.3.6.1.2.1.10.166.4.0.2 mplsLdpPathVectorLimitMismatch

Description

LDP/4/PVLIMITMISMATCH:OID [oid] PVL mismatch between entities. (PVLimitValue=[threshold])

The value of mplsLdpEntityPathVectorLimit is different from the value of the mplsLdpPeerPathVectorLimit.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.10.166.4.0.2 Warning

processingErrorAlarm(4)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

PVLimitValue

Indicates the threshold of the path vector.

Impact on the System

Session negotiation through Init messages failed and the session cannot be set up.

Possible Causes

The set versions were different.

Procedure

  • Collect alarm information and configuration information, and then contact technical support personnel.

Related Information

None

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 180718

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next