No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2BPTNL_1.3.6.1.4.1.2011.5.25.42.2.1.7.16 hwL2ProtocolTunnelDropThresholdFalling

L2BPTNL_1.3.6.1.4.1.2011.5.25.42.2.1.7.16 hwL2ProtocolTunnelDropThresholdFalling

Description

L2BPTNL/1/L2BPTNL_DROP_THRESHOLD_RESUME:OID [oid] The number of the protocol transmit on the port below the drop threshold.(PortName=[OCTET], ProtocolName=[OCTET], Dropthreshold=[INTEGER])

The trap was generated when the number of Layer 2 protocol packets passing the interface enabled with Layer 2 protocol transparent transmission fell below the threshold. This is a matching trap of hwL2ProtocolTunnelDropThresholdRaising.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.42.2.1.7.16 Critical communicationsAlarm (2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

PortName

Name of the interface that is enabled with Layer 2 protocol transparent transmission

ProtocolName

Name of the protocol whose packets are transparently transmitted

Dropthreshold

Threshold for discarding Layer 2 protocol packets

Impact on the System

Services will not be affected.

Possible Causes

The interface enabled with Layer 2 protocol transparent transmission was configured with the threshold for discarding Layer 2 protocol packets, and the number of Layer 2 protocol packets that were transparently transmitted on the interface fell below the threshold.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 191230

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next