No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM_1. hwMplsTeFrrProtNotAval

LSPM_1. hwMplsTeFrrProtNotAval


LSPM/2/HWFRRPROTNOTAVAL:OID [oid] The primary Tunnel has been unbound by bypass Tunnel.(primary Tunnel index=[integer1].[integer2].[integer3].[integer4], bypass Tunnel index=[integer5])

The trap message was sent when the binding between the primary tunnel and the bypass tunnel was deleted.


Alarm ID Alarm Severity Alarm Type




Name Meaning


Indicates the MIB object ID of the alarm.

primary Tunnel index

Indicates the index of the main tunnel.

bypass Tunnel index

Indicates the index of the bypass tunnel.

Impact on the System

The binding between the primary tunnel and the bypass tunnel is deleted. This causes traffic interruption once the working tunnel goes down.

Possible Causes

1. Configurations changed.

2. The protected tunnel went Down.


  • This trap message is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 191227

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next