No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.1 hwMplsStaticLSPUp

LSPM_1.3.6.1.4.1.2011.5.25.121.2.1.1 hwMplsStaticLSPUp

Description

LSPM/2/STATICLSPUP:OID [oid] Static LSP went Up. (LspIndex=[octet], InSegmentIndex=[octet], OutSegmentIndex=[octet], OutIfIndex=[integer], LspName=[octet], LspStatus=[integer], OutIfName=[octet], InIfIndex=[octet], InIfName=[octet], DownReason=[integer])

The private trap message was output when the static LSP was in the Up state.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.121.2.1.1

Major

environmentalAlarm(6)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

LspIndex

Indicates the index of the LSP.

InSegmentIndex

Indicates the inSegment index of a static LSP.

OutSegmentIndex

Indicates the outSegment index of a static LSP.

OutIfIndex

Indicates the outbound interface index of a static LSP.

LspName

Indicates the name of a static LSP.

LspStatus

Indicates the status of a static LSP.

OutIfName

Indicates the outbound interface name of a static LSP.

InIfIndex

Indicates the inbound interface index of a static LSP.

InIfName

Indicates the inbound interface name of a static LSP.

DownReason

Indicates the reason that the static LSP down.

Impact on the System

Services will not be affected.

Possible Causes

1. The interface was Up.

2. The next hop configured for the static LSP was consistent with the next hop in the routing table after routes changed.

3. The link was recovered or the new static LSPs were configured.

Procedure

  • This trap message is informational only, and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 184681

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next