No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RSVP_1.3.6.1.4.1.2011.5.25.148.1.12.2.3 hwRsvpTeAuthFail

RSVP_1.3.6.1.4.1.2011.5.25.148.1.12.2.3 hwRsvpTeAuthFail

Description

RSVP/2/HWRSVPAUTHFAIL: OID [oid] The RSVP neighbor authentication is incorrect. (IpAddress=[ipaddr])

RSVP authentication failed.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.148.1.12.2.3 Major communicationsAlarm(2)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

IpAddress

IP address of a neighbor

Impact on the System

Not all packets sent from the RSVP neighbor are processed. As a result, RSVP services cannot run properly.

Possible Causes

Incorrect authentication packets were received from the RSVP neighbor.

Procedure

  1. Run the display this command in the views of directly connected interfaces on both ends to check whether the authentication key information displayed in the mpls rsvp-te authentication plain fields are the same.

    • If so, go to Step 2.

    • If not, run the mpls rsvp-te authentication command to modify the configuration to keep authentication key information the same on both ends.

    • If the authentication key information is not displayed, the authentication key is in encrypted text. Modify the configuration to keep the authentication key information the same on both ends.

  2. Collect alarm information and configuration information, and then contact technical support personnel.
  3. End.

Related Information

None.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 184628

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next