No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2IFPPI_1. hwMacLimitOverThresholdAlarm

L2IFPPI_1. hwMacLimitOverThresholdAlarm


L2IFPPI/4/MAC_LIMIT_ALARM:OID [oid] MAC address learning reached the limit. (L2IfNum=[INTEGER], MacLimitVlanId=[INTEGER], MacLimitVsiName=[OCTET], L2PortNum=[INTEGER], BaseTrapSeverity=[INTEGER], BaseTrapProbableCause=[INTEGER], BaseTrapEventType=[INTEGER], MacDynAddressLearnNum=[INTEGER], MacLimitMaxMac=[INTEGER], L2IfPortName=[OCTET])

The number of MAC addresses learned by the interface, VLAN, or VSI reached the upper limit.


Alarm ID Alarm Severity Alarm Type Warning other(1)


Name Meaning
oid Indicates the OID of the alarm.
L2IfNum Indicates the interface index.
MacLimitVlanId Indicates the VLAN ID.
MacLimitVsiName Indicates the VSI name.
L2PortNum Indicates the port index.
BaseTrapSeverity Indicates the alarm severity.
BaseTrapProbableCause Indicates the alarm cause.
BaseTrapEventType Indicates the alarm type.
MacDynAddressLearnNum Indicates the number of learned MAC addresses.
MacLimitMaxMac Indicates the maximum number of MAC addresses to be learned.
L2IfPortName Indicates the interface name.

Impact on the System

No more MAC addresses can be learned.

Possible Causes

The number of MAC addresses learned by the interface, VLAN, or VSI reached the upper limit.


  1. Check whether the alarm was generated on an interface, in a VLAN, or in a VSI.

    Perform one of the following operations according to networking requirements:

    • Increase the upper limit on the number of MAC addresses to be learned.
    • Delete unnecessary MAC addresses.
    • Ignore the alarm.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 181575

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next