No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
OSPF_1.3.6.1.2.1.14.16.2.12 ospfOriginateLsa

OSPF_1.3.6.1.2.1.14.16.2.12 ospfOriginateLsa

Description

OSPF/4/OGNLSA:OID [oid]: An LSA is generated. (LsdbAreaId=[area-id], LsdbType=[lsa-type], LsdbLsid=[lsdb-ls-id], LsdbRouterId=[lsdb-router-id], ProcessId=[process-id], RouterId=[router-id], InstanceName=[instance-name])

A switch generated new LSAs. The possible cause was that the status of the interface changed, the status of the OSPF neighbor changed, or the role of the switch changed (for example, the switch imported routes).

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.2.1.14.16.2.12 Warning environmentalAlarm (6)

Parameters

Name Meaning

oid

Indicates the MIB object ID of the alarm.

LsdbAreaId

Indicates the area ID of a new LSA.

LsdbType

Indicates the type of the LSA.
  • 1: Router LSA
  • 2: Network LSA
  • 3: Summary LSA type 3
  • 4: Summary LSA type 4
  • 5: AS External LSA
  • 7: NSSA LSA
  • 9: Opaque LSA - scope Local
  • 10: Opaque LSA - scope area
  • 11: Opaque LSA - scope AS

LsdbLsid

Indicates the LS ID of an LSDB.

LsdbRouterId

Indicates the router ID of an LSDB.

ProcessId

Indicates the process ID.

RouterId

Indicates the router ID of the local switch.

InstanceName

Indicates the instance name.

Impact on the System

If the neighbor or interface status change trap is generated and no manual operations are performed within the period, services may be affected.

Possible Causes

1. The status of the interface changed.

2. The status of the neighbor changed.

3. The routes imported by OSPF changed.

Procedure

  1. Check the LSA type:

  2. Run the display ip routing-table lsdb-ls-id command to check whether the routing table changes.

    • If the routing table does not change, go to Step 3.

    • If the routing table changes, continue to check the cause of the route change or go to Step 3.

  3. Collect alarm information and configuration information, and then contact technical support personnel.
  4. End.

Related Information

None

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 184534

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next