No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFPDT_1. hwInputRateChangeOverThresholdNotice

IFPDT_1. hwInputRateChangeOverThresholdNotice


IFPDT/4/PORT_INRATECHG: OID [OID] The input rate change ratio exceeded the threshold.(IfIndex = [INTEGER], InterfaceName = [STRING], ThresholdPercent = [INTEGER], CurrentStatisticalPeriodRate = [COUNTER64], LastStatisticalPeriodRate = [COUNTER64]).

The sudden traffic volume change percentage in the inbound direction of interfaces exceeded the trap threshold.


Alarm ID Alarm Severity Alarm Type Warning qualityOfServiceAlarm(3)


Name Meaning


Indicates the trap OID.


Indicates the interface index.


Indicates the interface name.


Indicates the detection threshold of sudden traffic volume changes.


Indicates the bandwidth usage in the current traffic statistics collection interval.


Indicates the bandwidth usage in the previous traffic statistics collection interval.

Impact on the System

Packet loss may occur on interfaces.

Possible Causes

The sudden traffic volume change percentage in the inbound direction of interfaces exceeded the trap threshold.


  1. Run the display this interface command to view the Input bandwidth utilization field, and check whether the sudden traffic in the inbound direction of interfaces is normal.

    • If so, no action is required.
    • If not, check whether a loop exists on the link.

  2. Collect log information, and contact technical support personnel.
Updated: 2019-12-30

Document ID: EDOC1000142054

Views: 204715

Downloads: 44

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next