No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IFNET_1. hwIfMonitorHalfduplexRising

IFNET_1. hwIfMonitorHalfduplexRising


IFNET/1/HALFDUPLEXRISING: OID [oid] The work mode is half duplex. (hwIfMonitorIndex=[INTEGER])

The trap is generated when the interface works in half-duplex mode.


Alarm ID Alarm Severity Alarm Type Critical other(1)


Name Meaning


Indicates the MIB object ID of the alarm.


Indicates the physical index.

Impact on the System

Packets may be dropped when the interface works in half-duplex mode.

Possible Causes

The electrical interface worked in half-duplex mode.


  1. You can set the interface to work in full duplex mode by the duplex full command.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 180758

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next