No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SMLK_1. hwSmartLinkInactiveLinkResume

SMLK_1. hwSmartLinkInactiveLinkResume


SMLK/4/SMLK_SLAVEPORT_TRAP:OID [OID] [STRING] link port [INTEGER1] of smart link group [INTEGER2] was normal, the port is [OCTET].

A fault on the standby link of the Smart Link group was rectified.


Alarm ID Alarm Severity Alarm Type Warning equipmentAlarm(5)


Name Meaning
oid Indicates the MIB object ID of the alarm.
[STRING] Indicates the status of the interface in the Smart Link group, which can be active or inactive.
[INTEGER1] Indicates the index of the interface in the Smart Link group.
[INTEGER2] Indicates the Smart Link group index.
[OCTET] Indicates the name of the interface in the Smart Link group.

Impact on the System

The service traffic is switched to the active link.

Possible Causes

The slave interface in the Smart Link group was Up.


  1. This alarm is informational only, and no action is required.
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 182660

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next