No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
CSSM_1.3.6.1.4.1.2011.5.25.183.3.3.2.9 hwCssLpuInvalidLicense

CSSM_1.3.6.1.4.1.2011.5.25.183.3.3.2.9 hwCssLpuInvalidLicense

Description

CSSM/1/CSSLICENSEINVALID: OID [OID] The license on the device is not activated or has expired, so the Lpu-based CSS function can not be used.

When the license on the device is not activated or has expired, no CSS can be set up using service interfaces.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.183.3.3.2.9 Critical processingErrorAlarm(4)

Parameters

Name Meaning
OID Indicates the MIB object ID of the alarm.

Impact on the System

No CSS can be set up using service interfaces and the established CSS breaks.

Possible Causes

To set up a CSS using service interfaces, a license is required. When the license on the device is not activated or has expired, no CSS can be set up using service interfaces.

Procedure

  1. Run the display license command to check the status of the license.
  2. If the license on the device is not activated, run the license active file-name command to activate the license, and then re-set up the CSS. If no license is on the device, apply for a license file and activate the license.
  3. If the license has expired, use the invalidation code of the old license to apply for a new license and upload the new license to the storage media on the device. Then run the license active file-name command to activate the new license, and then re-set up the CSS.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 181571

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next