No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE_1. hwStrackIfVlanInfo

SECE_1. hwStrackIfVlanInfo


SECE/4/STRACKPORT:OID [oid] An attack occurred.(Interface=[OCTET], InnerVlan=[INTEGER], OuterVlan=[INTEGER], EndTime=[OCTET], TotalPackets=[INTEGER])

The system detected an attack on an interface.


Alarm ID Alarm Severity Alarm Type Warning securityServiceOrMechanismViolation(10)


Name Meaning
OID Indicates the ID of the MIB object.
Interface Indicates the access interface of the attacker.


Indicates the inner VLAN ID of the attacker.


Indicates the outer VLAN ID of packets sent from the attacker.
EndTime Indicates the end time of the attack.
TotalPackets Indicates the number of packets received from the attacker.

Impact on the System

The CPU is busy processing attack packets. As a result, normal service packets cannot be processed in time or even discarded.

Possible Causes

The number of packets with the specified interface and VLAN ID sent to the CPU exceeded the alarm threshold.


  1. Run the display auto-defend attack-source detail command to check the possible attack source on an interface and check whether the interface is normal according to the packet increase rate in entries.
  2. If an attack is initiated by a user and the user is the only one connected to the interface, shut down the interface and check whether the interface is normal.
  3. If the interface is connected to multiple users and some users initiate attacks, configure the blacklist.
  4. If only entries exist on the interface or entries cannot be determined, collect alarm, log, and configuration information, and contact technical support personnel.

Related Information


Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 190845

Downloads: 44

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next