Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SECE_1.3.6.1.4.1.2011.5.25.165.2.2.4.2 hwICMPIfDropALarm
Description
SECE/4/ICMP_IF_SPEEDLIMIT_ALARM:OID [oid] Interface icmp packet speed exceed the speed-limit value configed [INTEGER], Interface [OCTET].
The rate of ICMP packets on an interface exceeded the alarm threshold.
Attribute
| Alarm ID | Alarm Severity | Alarm Type |
|---|---|---|
| 1.3.6.1.4.1.2011.5.25.165.2.2.4.2 | Warning | equipmentAlarm(5) |
Parameters
| Name | Meaning |
|---|---|
| oid | Indicates the ID of the MIB object. |
| INTEGER1 | Indicates the alarm threshold. |
| Interface | Indicates the source interface of packets. |
Impact on the System
If the alarm is generated, the user traffic volume exceeds the threshold. The excess traffic is discarded by the device. As a result, user traffic may be interrupted intermittently.
Procedure
- If user services are not affected, the alarm does not need to be handled.
- If the user services are intermittently disconnected, run the icmp rate-limit interface interface-type interface-number [ to interface-number ] threshold threshold-value command in the system view to adjust the ICMP rate limit on an interface. Increasing the rate limit may affect CPU usage. You are advised to contact technical support personnel.
Previous
