No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Alarm Handling

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of alarms on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BASETRAP_1.3.6.1.4.1.2011.5.25.129.2.1.18 hwEntityRegSuccess

BASETRAP_1.3.6.1.4.1.2011.5.25.129.2.1.18 hwEntityRegSuccess

Description

BASETRAP/4/ENTITYREGSUCCESS: OID [oid] Physical entity registered successfully. (Index=[INTEGER], Severity=[INTEGER], ProbableCause=[INTEGER], EventType=[INTEGER], ContainedIn=[INTEGER], PhysicalName="[OCTET]", RelativeResource ="[OCTET]", ReasonDescription="[OCTET]")

This recovery notification is generated when the board is registered successfully.

Attribute

Alarm ID Alarm Severity Alarm Type
1.3.6.1.4.1.2011.5.25.129.2.1.18 Warning operationalViolation(8)

Parameters

Name Meaning
[oid] Indicates the ID of the MIB object.
Index Indicates the index of the entity. The entity in the alarm message is a board.
Severity Indicates the severity level of the alarm.
ProbableCause Indicates the possible causes of the alarm. The codes of the possible causes are as follows:

1024: IANAITUPROBABLECAUSE_OTHER indicates that the causes are unknown.

EventType Indicates the alarm type. Alarms are classified into the following types:
  • communicationsAlarm (2): alarm for communication problems
  • qualityOfServiceAlarm (3): alarm for service quality
  • processingErrorAlarm (4): alarm for processing errors
  • equipmentAlarm (5): alarm for the equipment
  • environmentalAlarm (6): alarm for the environment
  • operationalViolation (8): alarm for the operation

The type of this alarm is operationalViolation (8).

ContainedIn Indicates the parent index of the entity. In the alarm message, this parameter indicates the index of the slot where the board is installed.
PhysicalName Indicates the physical name of the entity. For example, the physical name of an LPU is LE01G48SC.
RelativeResource Indicates the name of a component that is associated with the alarm.
ReasonDescription Indicates the description of causes of the alarm.

Impact on the System

None.

Possible Causes

The board is registered successfully.

Procedure

  1. This is a normal notification and no action is required.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142054

Views: 181536

Downloads: 44

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next