No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring BFD for PW

(Optional) Configuring BFD for PW

Context

BFD for PW is recommended because it speeds up fault detection.

You can configure static BFD for PW or dynamic BFD for PW on the PE devices at both ends of a PW.
  • To configure static BFD for PW, BFD parameters must be specified. Static BFD for PW applies to small-size networks.
  • To configure dynamic BFD for PW, BFD parameters do not need to be specified. Dynamic BFD for PW applies to large-size networks.

Procedure

For details, see the following topics.
NOTE:
  • BFD for PW on both PEs at the two ends must be configured or deleted simultaneously. Otherwise, the statuses of PWs on the PEs are inconsistent.
  • To monitor statuses of tunnels that carry PWs, configure BFD for tunnel. For detailed configurations, see MPLS LDP Configuration and MPLS TE Configuration in the S9300, S9300E, and S9300X V200R010C00 Configuration Guide - MPLS.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 111362

Downloads: 203

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next