No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an MCE Device

Configuring an MCE Device

Pre-configuration Tasks

A multi-VPN-instance CE (MCE) device can connect to multiple VPNs. The MCE solution isolates services of different VPNs while reducing cost of network devices.

Before configuring an MCE device, complete the following tasks:

  • Configure VPN instances on the MCE and PE connected to it (one instance for each service). For details, see Configuring a VPN Instance.

  • Configure the link layer protocol and network layer protocol for LAN interfaces and connect the LAN to the multi-instance CE (each service using an interface to access the multi-instance CE).

  • Bind related VPN instances to the interfaces of the multi-instance CE and PE interfaces through which the PE accesses the multi-instance and configure IP addresses for those interfaces.

Configuration Process

The following tasks are mandatory and can be performed in a random order.

Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 115377

Downloads: 210

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next