No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring BGP GR for MP-BGP

Configuring BGP GR for MP-BGP


When MP-BGP restarts, the VPNv6 peer relationship is re-established and traffic forwarding is interrupted. After BGP GR is enabled, traffic interruption can be avoided. Configure BGP GR for MP-BGP on all the PEs (including the PE that serves as the ASBR) and the RRs that reflect the VPNv4 route, unless BGP GR has been configured for MP-BGP when BGP GR is configured between PEs and CEs.


Updated: 2019-12-31

Document ID: EDOC1000142068

Views: 131176

Downloads: 220

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next