No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring the Running Status of BGP/MPLS IPv6 VPN

Monitoring the Running Status of BGP/MPLS IPv6 VPN

Context

Monitoring the running status of BGP/MPLS IPv6 VPN involves checking IPv6 VPN instance information, VPNv6 peer information, and BGP peer log information. In routine maintenance, you can run the following commands in any view to check the running status of the BGP/MPLS IPv6 VPN.

Procedure

  • Run the display ipv6 routing-table vpn-instance vpn-instance-name command to view the IP routing table of the VPN instance IPv6 address family.
  • Run the display ip vpn-instance [ verbose ] [ vpn-instance-name ] command to view information about the VPN instance.
  • Run the display bgp vpnv6 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table ipv6-address [ prefix-length ] command to view the BGP VPNv6 routing entries.
  • Run the display bgp vpnv6 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table statistics command to view statistics on the BGP VPNv6 routing table.
  • Run the display bgp vpnv6 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table command to view information about the BGP VPNv6 routing table.
  • Run the display bgp vpnv6 { all | vpn-instance vpn-instance-name } group [ group-name ] command to view information about the BGP VPNv6 peer group.
  • Run the display bgp vpnv6 all peer [ [ ipv4-address ] verbose ] or display bgp vpnv6 vpn-instance vpn-instance-name peer [ [ ipv6-address ] verbose ] command to view information about the BGP VPNv6 peer.
  • Run the display bgp vpnv6 { all | vpn-instance vpn-instance-name } network command to view the IPv6 VPN routes advertised by BGP.
  • Run the display bgp vpnv6 { all | vpn-instance vpn-instance-name } paths [ as-regular-expression ] command to view information about the AS path of the BGP VPN-IPv6 routes.
  • Run the display bgp vpnv6 vpn-instance vpn-instance-name peer { group-name | ipv6-address } log-info command to view the logs of the VPN instance IPv6 address family.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 115387

Downloads: 210

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next