No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the mVSI

Configuring the mVSI

Context

To forward the mVRRP packets on the NPEs through the mVSI on the UPE, do as follows.

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    vsi vsi-name static

    A VSI is created and the static member discovery mechanism is configured.

  3. Run:

    pwsignal ldp

    LDP is configured as the signaling protocol of the PW and the VIS-LDP view is displayed.

  4. Run:

    vsi-id vsi-id

    The ID of the VSI is set.

  5. Run:

    peer peer-address [ negotiation-vc-id vc-id ] [ tnl-policy policy-name ] upe

    The VSI peer relationship is configured between the UPE and the SPE. The MPLS LSR ID of the SPE is configured as the peer address.

  6. Run:

    quit

    Return to the VSI view.

  7. Run:

    admin-vsi

    The VSI is configured as the mVSI.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 114268

Downloads: 208

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next