No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Relationship Between PWE3 and L2VPN

Relationship Between PWE3 and L2VPN

PWE3 is a set of point-to-point (P2P) Layer 2 Virtual Private Network (L2VPN) technologies. Martini L2VPN is only one of the PWE3 technologies. PWE3 uses some Martini L2VPN techniques, including Label Distribution Protocol (LDP) signaling and encapsulation modes. In addition, PWE3 extends the Martini L2VPN.

PWE3 is extended Martini and has the same signaling process as Martini.

Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 114622

Downloads: 210

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next