No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring Physical Layer Fault Notification

(Optional) Configuring Physical Layer Fault Notification

Context

Physical layer fault notification speeds up fault detection and notification. This function implements the transfer of fault information between a PW and an AC. The PE device on the primary PW shuts down the corresponding AC interface when it detects a PW failure. The dual-homed CE devices then detect the link failure and trigger link switching.

Physical layer fault notification can only be configured on Ethernet interfaces that have set up VC connections. Perform the following operations on the PE devices to which the CE device is dual-homed:

Procedure

  1. Run:

    system-view

    The system view is displayed.

  2. Run:

    interface interface-type interface-number

    The AC interface view is displayed.

  3. Run:

    mpls l2vpn trigger if-down

    Physical layer fault notification is enabled.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 112469

Downloads: 208

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next