No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring a Kompella VLL

Configuring a Kompella VLL

Pre-configuration Tasks

The Kompella VLL uses BGP as the signaling protocol and supports the auto-discovery capability for complex topologies. This mode applies to large-scale enterprises.

Before configuring a Kompella VLL, complete the following tasks:

  • Configure static routes or an IGP protocol for the PE and P devices on the MPLS backbone network to implement IP connectivity.

  • Enable MPLS for the PE and P devices.

  • Set up an LSP tunnel or a TE tunnel between the PE devices.

    You also need to configure tunnel policies when VLL services need to be transmitted over TE tunnels or when VLL services need to be load balanced among multiple tunnels to fully use network resources. For details, see step 1 in Configuring and Applying a Tunnel Policy.

NOTE:

If you create local connections, Interior Gateway Protocol (IGP) and Label Distribution Protocol (LDP) are not required and the VLL network requires no P device.

Configuration Process

To configure the Kompella VLL, perform the following operations in sequence. To establish local connections, the PE devices do not need to exchange L2VPN information with each other. You can choose whether to perform optional operations based on site requirements.

Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 112940

Downloads: 208

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next