No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration


All VPLS convergence configurations are complete.


  • Run the display admin-vsi binding [ admin-vsi vsi-name ] command to check the binding relationships between the mVSI and the service VSI.
  • Run the display bfd configuration { { all | static } for-vsi-pw | vsi-pw vsi vsi-name peer peer-address [ vc-id vc-id ] } [ verbose ] command to check the BFD configuration on BFD for VSI PW.
  • Run the display bfd session { all | static } for-vsi-pw [ verbose ] command to check BFD sessions on BFD for VSI PW.
  • Run the display bfd statistics session{ all | static } for-vsi-pw command to check BFD statistics on BFD for VSI PW.
Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 114509

Downloads: 210

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next