No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VPNv6 GR

Configuring VPNv6 GR

Pre-configuration Tasks

Before configuring VPNv6 GR, complete the following task:

Configuration Process

The configuration of VPNv6 GR includes the following:
  • Configure IGP GR, BGP GR, and MPLS LDP GR on the PEs.
  • Configure IGP GR and MPLS LDP GR on the P.
  • Enable IGP GR or BGP GR on the CEs.
  • Enable IGP GR, BGP GR, and MPLS LDP GR on the ASBRs when inter-AS is configured.

GR cannot ensure uninterrupted traffic when the local and neighboring devices perform active/standby switchovers simultaneously.

Perform the following tasks to complete the VPNv6 GR configuration.

Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 112024

Downloads: 204

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next