No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting BGP TCP Connections of a VLL

Resetting BGP TCP Connections of a VLL

Context

If the BGP L2VPN application and other applications share the same TCP connection, the reset bgp l2vpn command resets the BGP neighbor relationship of all applications on this TCP connection. Confirm your action before using the command.

After the parameters configured in the BGP L2VPN address family view are modified, you can run the reset bgp l2vpn command to reset the TCP connection of the BGP L2VPN. After that, the BGP negotiates parameters, sends label information, and establishes a session again.

Procedure

  • Run the reset bgp l2vpn { as-number | peer-ip-address | all | internal | external } command in the user view to reset BGP L2VPN TCP connections.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 111915

Downloads: 204

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next