No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration

Prerequisites

The configurations of static BFD for PWs are complete.

Procedure

  • Run the display bfd configuration pw interface interface-type interface-number [ secondary ] [ verbose ] command to check the BFD configuration.
  • Run the display bfd session pw interface interface-type interface-number [ secondary ] [ verbose ] command to check information about the BFD session.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 119735

Downloads: 212

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next