No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Enlarging the Operation Scope of a Network with a Hop Limit

Enlarging the Operation Scope of a Network with a Hop Limit

You can set up a GRE tunnel between two devices on a network to hide the hops between them. If a network using IP protocol limits the hop count to 255 and the hop count between two PCs is more than 255, they cannot communicate with each other. Using a GRE tunnel can negate this problem and enlarge the network operation scope, as shown in Figure 1-4.

Figure 1-4  Enlarging the network operation scope

For example, the Routing Information Protocol (RIP) protocol defines an unreachable route when the hop count reaches 16. You can configure a GRE tunnel between two devices to reduce the hop count of the RIP route passing through the GRE tunnel to less than 16 and thereby make this route reachable.

Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 119229

Downloads: 212

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next