No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Checking the Configuration

Checking the Configuration


The configurations of the Hub and Spoke function are complete.


  • Run the display ipv6 routing-table vpn-instance vpn-instance-name command to check routing information about the VPN-in and VPN-out on the Hub-PE.

    If the VPN-in routing table has routes to all the Spoke stations, and the VPN-out routing table has routes to the Hub and all the Spoke stations, it means the configuration is successful.

  • Run the display ipv6 routing-table command to check routing information on the Hub-CE and all the Spoke-CEs.

    The Hub-CE and all the Spoke-CEs have routes to the Hub and all the Spoke sites.

Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 115437

Downloads: 210

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next