No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating a Static PW

Creating a Static PW


When creating a static PW, specify the VC label.

Perform the following operations on the PEs at both ends of a PW.


  1. Run:


    The system view is displayed.

  2. Run:

    interface interface-type interface-number [ .subinterface-number ]

    The AC interface view is displayed.

  3. (Optional) On an Ethernet interface, run undo portswitch

    The interface is switched to Layer 3 mode.

    By default, an Ethernet interface works in Layer 2 mode.

  4. Run:

    mpls static-l2vc { { destination ip-address | pw-template pw-template-name vc-id } * | destination ip-address [ vc-id ] } transmit-vpn-label transmit-label-value receive-vpn-label receive-label-value [ tunnel-policy tnl-policy-name | [ control-word | no-control-word ] | [ raw | tagged ] ] *

    A static PW is created.


    When the AC interfaces are Ethernet interfaces, you can specify the parameters raw and tagged.

  5. (Optional) Run:

    mpls l2vpn service-name service-name

    A name is configured for the L2VPN service.

    After a name is configured for the L2VPN service, you can maintain the L2VPN service by clicking the name directly on the NMS GUI.

Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 115523

Downloads: 210

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next