No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Configuration Guide - VPN

S9300, S9300E, and S9300X V200R010C00

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring Hub and Spoke

Configuring Hub and Spoke

In Hub and Spoke networking, a central site is deployed and all the other sites communicate through the central site. The central site controls communication between sites.

Pre-configuration Tasks

Before configuring Hub and Spoke, complete the following tasks:

  • Configure IGP on PE devices and P devices on the MPLS backbone network.


    RIP-1 cannot be used on the backbone network.

  • Configure basic MPLS capabilities and MPLS LDP (or RSVP-TE) on PE devices and P devices on the MPLS backbone network.

  • Configure the IP addresses, through which the CE devices access the PE devices, on the CE devices.


You also need to configure VPN tunnel policies when VPN services need to be transmitted over TE tunnels or when multiple tunnels need to perform load balancing to fully use network resources. For detailed configuration, see Configuring Tunnel Policies.

Configuration Process

All the following tasks are mandatory. Perform these tasks in this sequence to complete the Hub and Spoke configuration.

Updated: 2019-08-21

Document ID: EDOC1000142068

Views: 111460

Downloads: 203

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next