No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



OSPF/6/JOIN_MULGRP_FAIL:Failed to join the multicast group. (MulticastGroup Address=[IPADDR], ReturnValue=[STRING], InterfaceNetworkIndex=[ULONG], PhysicalIndex=[ULONG], InterfaceName=[STRING])


The OSPF interface failed to join the multicast group.


Parameter Name Parameter Meaning
Multicast group address Indicates the multicast group address.
ReturnValue Indicates the returned value.
InterfaceNetworkIndex Indicates the index of the network where an interface resides.
PhysicalIndex Indicates the index of a physical interface.
InterfaceName Indicates the name of an interface.

Possible Causes

Failed to add an interface to the multicast group.


  1. Check whether the multicast function on the interface was available.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 576568

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next