No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



CSPF/3/PATH_ERROR: Failed to calculate the path due to [PathError].


Path computation fails.


Parameter Name Parameter Meaning
Path error string, including:
  • configuration of two interface address

  • configuration of next hop after

  • configuration of next hop after egress

  • configuration of egress node directly as strict is not permitted

  • configuration of next hop after egress node is not permitted

Possible Causes

Path computation fails.


  1. Check explicit path using display explicit-path and verify path for errors specified in log message and correct explicit path configuration.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 571824

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next