No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
VRRP/4/STATEWARNING

VRRP/4/STATEWARNING

Message

VRRP/4/STATEWARNING:Virtual Router state [State]. (Interface=[STRING], VrId=[ULONG], InetType=[STRING])

Description

When the VRRP status changed, the following information is logged: the interface name, status change, and reason of the status change.

Parameters

Parameter Name Parameter Meaning
[State]

indicates the status change. The value is specified as follows:

  1. INITIALIZE changed to MASTER.

  2. BACKUP changed to MASTER.

  3. MASTER changed to BACKUP.

  4. MASTER changed to INITIALIZE.

  5. BACKUP changed to NOTACTIVE.
Interface indicates the name of an interface.
VrId indicates the ID of a VRRP backup group.
InetType indicates the type of network.

Possible Causes

The reason corresponding to a specific error code is as follows:

1: The fault of a device or a link occurred.

2: The fault recovered on a device or a link.

3: The configuration changed.

Procedure

  1. For a device fault, check the status of the interface configured with VRRP.
  2. For a link fault, check the status of the VRRP link.
  3. For a device or link recovery, no action is required.
  4. For a configuration change, check the VRRP configuration.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 553838

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next