No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ACLE/3/RESOURCE_APPLY

ACLE/3/RESOURCE_APPLY

Message

ACLE/3/RESOURCE_APPLY:"[STRING]"

Description

Failed to deliver an ACL-based simplified traffic policy.

Parameters

Parameter Name Parameter Meaning
[STRING]

Indicates the reason for the failure of ACL-based simplified traffic policy delivery.

Possible Causes

  • Configuration conflict
  • ACL resource insufficiency

Procedure

  1. Run the display traffic-applied record command to check whether the ACL-based simplified traffic policy is applied successfully.

    • If so, no further action is required.
    • If not, go to step 2.

  2. Check whether there is a configuration conflict according to error information in the logs.

    • If so, go to step 3.
    • If not, go to step 4.

  3. Remove the conflicting configuration, reconfigure an ACL-based simplified traffic policy, and run the display traffic-applied record command to check whether the new ACL-base simplified traffic policy is applied successfully.

    • If so, no further action is required.
    • If not, go to setp 7.

  4. Check whether MQC has insufficient ACL resources according to error information in the logs.

    • If so, go to step 5.
    • If not, go to setp 7.

  5. Run the display traffic-applied record command to check whether redundant ACL-based simplified traffic policies are configured.

    • If so, go to step 6.
    • If not, go to setp 7.

  6. Delete redundant ACL-based simplified traffic policies, reconfigure an ACL-based simplified traffic policy, and run the display traffic-applied record command to check whether the new ACL-based simplified traffic policy is applied successfully.

    • If so, no further action is required.
    • If not, go to setp 7.

  7. Collect log information and configuration information, and then contact technical support personnel. You can collect diagnostic information using the display diagnostic-information command.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 549668

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next