No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ALML/4/R1R2_SYN_END

ALML/4/R1R2_SYN_END

Message

ALML/4/R1R2_SYN_END: The board in slot [STRING] has finished version upgrade and will be reset.

Description

After a board with a version earlier than V100R003 is used as the standby main control board of a V100R006 device, the board version is upgraded and the device restarts.

Parameters

Parameter Name Parameter Meaning
[ULONG] Specifies the slot ID.

Possible Causes

After a board with a version earlier than V100R003 is used as the standby main control board of a V100R006 device, the board version is upgraded.

Procedure

  1. After several minutes, run the display device command to check whether the board is registered.

    • If so, go to step 3.
    • If not, go to step 2.

  2. Contact technical support personnel.
  3. End.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 549168

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next