No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



SW_SNPG/4/ROUTER_PORT_EXCEED:The number of router ports exceeded the maximum value. ([STRING])


The number of router interfaces exceeds the upper limit.


Parameter Name Parameter Meaning
[STRING] Indicates the VLAN or VSI.

Possible Causes

The number of router interfaces in the VLAN or VSI exceeds the upper limit.


  1. Display router interface information in the multicast group: display l2-multicast forwarding { vlan vlan-id | vsi vsi-name } group-address group-address
  2. Check whether the number of outbound interfaces exceeds the upper limit.
  3. Delete unneeded static interfaces: undo l2-multicast static group group-address group-address
  4. Check whether the log is still recorded.
  5. If the log is still recorded, collect log information and configuration information, and then contact technical support personnel. For details, see Troubleshooting-Information Collection-Collecting Diagnostic Information.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 574551

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next