No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
RM/3/ADDHOSTRT_TBL_LMT

RM/3/ADDHOSTRT_TBL_LMT

Message

RM/3/ADDHOSTRT_TBL_LMT:The number of routes in URT reached the maximum when a direct route was added to URT. (DestinationAddress=[STRING])

Description

The number of routes in the routing table reached the upper limit when a direct route was added to the routing table.

Parameters

Parameter Name Parameter Meaning
DestinationAddress Indicates the destination address.

Possible Causes

Excessive routes were added.

Procedure

  1. Purchase a new license.
  2. Confirm the network requirements, and check whether the configuration is correct.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 545507

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next