No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TUNN_PS/2/DEL_PS_WTUNN_FAIL

TUNN_PS/2/DEL_PS_WTUNN_FAIL

Message

TUNN_PS/2/DEL_PS_WTUNN_FAIL:Failed to get the work tunnel when delteing protection group! (Index=[ULONG])

Description

The working tunnel cannot be found during the deletion of the protection group.

Parameters

Parameter Name Parameter Meaning
Index indicates the index of a working tunnel.

Possible Causes

During the deletion of the protection group, information about the working tunnel cannot be found according to the index of the working tunnel.

Procedure

  1. Check whether the configuration of the protection group is correct.
  2. Check whether the status of the protection tunnel is normal.
  3. Collect the error information prompted by the system.
  4. Collect log information and configuration information, and then contact technical support personnel.
Translation
Download
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 547881

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next