No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



DHCP/4/DHCPV6_ALLOC_ADDR_CONFLICT:DHCPV6 client alloc address is conflict. (IP6 Address = [STRING], InterfaceName=[ STRING]).


The IPv6 address requested by the DHCPv6 client conflicted.


Parameter Name Parameter Meaning
IP6 Address This object indicates the conflicting IPv6 address.
InterfaceName This object indicates the name of the interface that requests an IPv6 address.

Possible Causes

  • The requested IPv6 address has been configured.

  • Other users in the network use the requested IPv6 network.


  1. Run the display dhcpv6 client [ interface interface-type interface-number ] command to check whether the DHCPv6 client can request an IPv6 address. If the DHCPv6 client has requested an IPv6 address, go to step 3. If the DHCPv6 client fails to request an IPv6 address, go to step 2.
  2. Contact technical support personnel.
  3. End.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 570250

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next