No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



ALML/4/OLD_BOOT_SYN_END: The board in slot [STRING] has finished bootrom/bootload upgrade and will be reset.


The Bootrom/Bootload update has been completed on a card, and the card will reset.


Parameter Name Parameter Meaning
[STRING] Indicates an AS name.

Possible Causes

A card running a version prior to V200R001 has completed Bootrom/Bootload update.


  • This alarm is informational and no action is required. The card will work normally after the reset.
Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 579242

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next