No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Log Reference

S9300, S9300E, and S9300X V200R010C00

This document provides the explanations, causes, and recommended actions of logs on the product.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



PM/3/IDX_REACH_UPPER: The number of measure has reached the upper limit ([max-number]).


The number of items to be measured has reached the upper limit.


Parameter Name Parameter Meaning


The maximum number of items to be measured.

Possible Causes

The number of items to be measured has reached the upper limit.


  1. Run the display this command in the PM view to check current statistical tasks and bound instances.
  2. Perform the following operations to reduce registered statistics indicators:

    • Run the undo statistics-task task-name command in the PM view to delete unnecessary statistical tasks.
    • Run the undo binding instance-type instance-type { all | instance { instance-name }& <1-5> } command to delete unwanted performance instances bound to a specified statistical task.
    • Run the measure disable [ measure-name ] command in a performance statistics task view to disable unwanted statistics indicators in a statistical task.

Updated: 2019-08-21

Document ID: EDOC1000142069

Views: 547776

Downloads: 37

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next